Consejo Practico
This month’s Tech Tip is supplied by Flannery Inc.
3 Way Corners are simple to install. Simply place the 3 Way into position and tap in the prongs. Nails, screws or glue are not required for installation.3 Way metal corners are less than half the thickness of vinyl 3-way corners. This means a substantial savings of drywall mud at every 3-way corner location.
Place the 3 Way Corner
Cap in the desired location.
Hold the 3 Way corner firmly against the drywall and tap the prong into the drywall. This will lock the 3 Way corner into position.
The Bullnose corners are then placed over the cap flange.
