February 2015 Buzz Guide
Walls & Ceilings presents a selection of products for the February Buzz Guide.
Product Buzz Guides
Total Stop RA - Because We Don't Let Moisture Get To Us
TOTAL WALL
Total Stop RA is a rubberized coating that cures to produce a permanent weather resistive barrier. This ready-to-use product can be trowel or roller applied. The product can be used with wood sheathing, exterior gypsum and most substrates.
For more information, email customerservice@totalwall.com or visit totalwall.com.
Deflection Clip Line Expanded
Flex-Ability Concepts
The company has announced that its line of deflection clips, the Three Legged Dog, has expanded to include the following sizes: 1â??-, 2½-, 3â??-, 6-, 8- and 10-inch. Installation is extremely simple as the clip easily slips over the end of a stud before it is raised into place. No dropped clips and the installer’s hands are both free.
For more information, visit flexabilityconcepts.com
Data Center Ceiling System
Armstrong World Industries Inc.
Specifically designed to meet data center needs, new Prelude XL Max suspension systems from Armstrong support loads up to 200 pounds for cable trays, bus bars, and other data center components. Using 3/8-inch threaded rod connections and integrated hanging clips, Prelude XL Max provides reconfigurable support for overhead cable tray and electrical distribution without a separate strut channel system. The pre-engineered system eliminates penetrations through the ceiling, minimizing air infiltration while improving access and aesthetics.
Visit armstrong.com/datacenterceilings for more information.
Light Gauge Metal Framing Fastener
Grabber
Designed specifically for metal framing, the Vector fastener drives through light-gauge metal with ease. Competitive tests compared the Vector screw against nine other fasteners through two layers of 25-gauge metal—and the results were dramatic.
Grabber’s new Vector screw significantly reduces drive time and increases productivity with its much sharper and steeper-angled point compared to traditional framing fasteners. Competitive tests have demonstrated that Vector point screws drive up to eight times faster than IFI SAE J78 fastener penetration standards and 50 percent faster than competing fasteners.
For more information, visit grabberman.com.
Finish Smooth with Phillips kwikSTICK Paper Faced Beads and Trims
Phillips Manufacturing Co.
Finish smooth with Phillips’ kwikSTIK paper faced products. With 25 different paper faced options, there is a perfect fit for every job. Phillips’ solutions offer proprietary, high strength, durable paper for a smooth, consistent finish once sanded. Superior bonds between steel and paper, quality tested in extreme cold, heat and wet conditions, eliminates edge cracking and nail pops—giving you a finish that doesn’t budge.
View Phillips’ paper faced selection, or request samples at phillipsmfg.com/paper-faced.
For more information, visit phillipsmfg.com.
Speed and Run - Time to Unplug the Cord
Makita
The 18V LXT Brushless Drywall Screwdriver (XSF03M) breaks new ground for drywall contractors. With Push Drive Technology, the 18V Screwdriver can be set on lock-on mode so the motor starts only when the fastener is engaged. This gives contractors a quieter work environment, and also saves on battery power. In internal testing, the XSF03M drove up to 1,800 screws into 1/2-inch drywall through 20 gauge steel studs on a single charge of the 4.0Ah battery. That’s enough fastening to hang about 40 sheets of drywall on a single charge, performance that no other cordless screwdriver can match.
For more information, visit Makita.com.
The New Lightweight Self-furring Synthetic Lath
Keene Building Products
KeedeLath is a lightweight self-furring synthetic lath that is easier to install and a lighter alternative to self-furred metal lath. The unique patented design replaces old metal lath in a variety of flooring and wall applications. KeedeLath is a better alternative to metal lath because it is rolled out and lays flat allowing for quicker install. This self-furring, high strength lath creates a mechanical bond without damaging your hands.
For more information, visit keenebuilding.com.
Get it On!
Larsen Products Corp.
Weld-Crete is so convenient you can get it on your surface in a single application.
Weld-Crete, bonds new concrete, stucco, tile setting beds, and terrazzo to any structural surface, be it on the interior or exterior. Weld-Crete’s open time lets you bond to concrete shear walls when needing a time lapse between the application of the bonding agent, the placement of reinforcement steel, placement of formwork, or the placement of concrete.
For more information on Weld-Crete, visit larsenproducts.com/weldcrete.php.
Top Quality Trowels and Corner Edgers
Demand Products
Demand Products is excited to introduce our new line of top quality trowels and corner edgers. Crafted in Germany from high grade stainless steel, these tools are branded with the Demand Products logo ensuring the same great quality you know and expect from Demand. Two point welding construction guarantees long lasting use for years to come.
Visit demandproducts.com to learn more.
Rustproof Plastic Lath NOW MEETS ASTM C1764, C1780, C1787 and C1788
Plastic Components
Perfect for rustproofing your installation and lowering installed costs Ultra-Lath is the superior alternative to metal! And it meets ASTM.
-
Safe on hands, easier to use than metal
-
Unaffected by moisture or chemicals
-
1/4-inch self-furred for ASTM compliance
-
Compatible with all cement-based products
-
Available in sheets, rolls and strips
Visit flipflashpages.uniflip.com/3/69658/332538/pub/ to learn about Ultra-Lath Plus.
FutureFlash - The Perfect Waterproofing System
MFM BUILDING PRODUCTS
Manufactured in the USA by MFM Building Products, FutureFlash is a prefabricated, waterproofing membrane designed for use around windows, doors, under stucco and other exterior wall systems. The FutureFlash system seals effectively, yet will not trap or promote moisture buildup inside the wall cavity.
More information can be found at mfmbp.com.
Looks Like Stucco, Applies Like Paint
Formulated Solutions
Bestcoat Textured Masonry Coatings are high-build acrylic waterproof coatings that economically hide surface irregularities and imperfections on masonry walls. Available in standard, Elastomeric or Waterproof versions, its key features include:
-
Rollable and sprayable
-
Water-based
-
Flexible, chip/crack-resistant
-
Resists wind-driven rain
-
Beautifies and protects in 20 standard colors plus store tints
-
Revitalize aging walls or finish any new masonry surface quickly and easily. Ask for your Bestcoat color card today!
For more information, visit formulatedsolutions.net/masonry-products.htm.